Home › Laboratory › Furnances, Ovens & Incubators › Bibby Scientific SI60 & SI60D Incubator (total visibility)
Bibby Scientific SI60 & SI60D Incubator (total visibility)
 Full visibility of samples
Easy access to working chamber
Many applications: Plant propagation, Humidity tests, Simulation of tropical conditions, Incubation of complete instruments and Corrosion testing
Choice of analogue or digital control
Constructed from clear Acrylic polymer to give total visibility of
samples at all times.
Designed for easy access with hinged front door panel. Each side
panel has 2 x 10mm diameter plugged holes for the introduction of
either gases or cables. The incubator does not have a base so that it
can be placed directly over complete instruments (base is available
as an accessory). Forced air circulation and electronic temperature
control ensure accurately maintained conditions.
For analogue model SI60, setting the temperature is via a calibrated
knob. For digital model SI60D, setting the temperature is more
accurately achieved via the LCD display. The latter also gives a
constant reading of actual temperature. Both models have a push
switch pre-set at 37°C. Additionally there is a temperature safety
cut-out set at 72°C.
The incubator is supplied flat packed, for assembly at point
of use. Assembly is simple and requires only a screwdriver.
Data Sheet
Manual
|
 
For larger views, please click on the small photos above.
Ordering Information
|
SI60 - Incubator, total visibility, analogue
SI60D - Incubator, total visibility, digital
SI60/1 - Acrylic base plate
SI60/2 - Plastic coated shelf/rack system with two shelves
|
|
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
Back To Last Page
|
|
|
|
