Maximum operating temperatures of 900 DegC, 1000 DegC and 1200 DegC Tube diameters range from 15 - 38mm Heated lengths from 130 - 400mm These models utilise a
resistance wire heating element wound around a ceramic worktube,
forming an integral part of the heating element to ensure excellent
thermal uniformity Rapid heat up to operating temperature Can be adapted to allow a non-oxidising atmosphere or vacuum, by fitting an additional worktube and end seals The thermocouple is located in
a protected position between the outside of the worktube and heating
element, allowing the full worktube diameter to be used Normally built on the
horizontal base pictured left, this furnace range can optionally be
mounted vertically with a separate control box Applications in materials
research include testing of novel materials under strict temperature
and varying atmosphere conditions Applications in the
electronics industry include testing electronic components and
semiconductor materials under inert atmospheres or vacuum Applications in
instrumentation include testing of temperature sensors such as
thermocouples and PT100's, which may require enhanced thermal uniformity
Please
note - Product designs and specifications are subject to change without
notice. The user is responsible for determining the suitability of this
product.