|
|
|
|
 |
 |
|
|
Based in high-tech Huntsville, Alabama, Digium is the creator and primary developer of Asterisk, the industry's first Open Source PBX. Used in combination with Digium's PCI telephony interface cards, Asterisk offers a strategic, highly cost-effective approach to voice and data transport over TDM, switched, and Ethernet architectures. Digium solutions
reduce the costs of traditional TDM and VoIP implementations through Open
Source, standards-based software and next-generation gateways, media servers,
and application servers. Digium hardware supports traditional voice protocols,
including PRI, RBS, FXS, FXO, E&M, Feature Group D, Groundstart, Loopstart,
and GR-303. Data protocols include PPP, Cisco HDLC, and Frame Relay. For
packet voice, Asterisk supports IAX™ (Inter-Asterisk eXchange),
SIP, MGCP, Skinny (SCCP), and H.323 VoIP protocols. |
|
 |
|
| Digium TC400B The TC400B is a bundle of the half-length, low-profile PCI-2.2 compliant TC400P base card and the TC400M voice processing module. |
 |
|
|
Digium Wildcard TDM800P The Wildcard TDM800P is a half-length PCI 2.2-compliant card for connecting analog telephones and analog POTS lines through a PC. It supports combinations of FXS and/or FXO modules for a total of 8 lines. |
 |
|
|
Digium Wildcard B410P BRI ISDN Card The B410P is a half-length, full-height universal 3.3V and 5.0V 32-bit PCI 2.2 card supporting four BRI S/T interfaces. Each of the four ports of the B410P can be independently configured for TE or NT mode, with an optional PWR400M module for supplying power to ISDN telephones. |
 |
|
|
Digium Wildcard TE420 Digium's TE420 PCI Express card provides termination of up to 120 channels of voice or data across four E1, T1, or J1 interfaces in a PCIe x1 form factor. Selectable on a per-port or per-card basis, the TE420 allows E1 and T1 circuits to be mixed with full channel synchronization. |
 |
|
|
Digium Wildcard TE420B Digium's TE420B PCI Express card provides termination of up to 120 channels of voice or data across four E1, T1, or J1 interfaces in a PCIe x1 form factor. Selectable on a per-port or per-card basis, the TE420B allows E1 and T1 circuits to be mixed with full channel synchronization. |
 |
|
|
Digium Wildcard TE412P The TE412P is a bundling of our leading TE410P product and our new VPM450M Octasic DSP-based echo cancelation module. The VPM450M provides a certified carrier-grade algorithm that has been labeled a benchmark for echo cancelation. This new module improves upon our older VPM400M and TE411P/TE406P products. |
 |
|
|
Digium Wildcard TE411P The TE406P and TE411P are the next generation of Digium hardware that offer on-board echo cancellation. They supports both E1 and T1 environments and is selectable on a per-card or per-port basis. |
 |
|
|
Digium Wildcard TE410P The TE410P is the next generation of Digium hardware that improves performance and scalability through bus mastering architecture. The TE410P supports both E1 and T1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1 and T1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. |
 |
|
|
Digium Wildcard TE407P The TE407P is a bundling of our leading TE405P product and our new VPM450M Octasic DSP-based echo cancelation module. The VPM450M provides a certified carrier-grade algorithm that has been labeled a benchmark for echo cancelation. This new module improves upon our older VPM400M and TE411P/TE406P products. |
 |
|
|
Digium Wildcard TE406P The TE406P and TE411P are the next generation of Digium hardware that offer on-board echo cancellation. They supports both E1 and T1 environments and is selectable on a per-card or per-port basis. |
 |
|
|
Digium Wildcard TE405P The TE405P is the next generation of Digium hardware that improves performance and scalability through bus mastering architecture. The TE405P supports both E1 and T1 environments and is selectable on a per-card or per-port basis. |
 |
|
|
Digium Wildcard TE220 Digium's TE220 PCI Express card provides termination of up to 60 channels of voice or data across two E1, T1, or J1 interfaces in a PCIe x1 form factor. Selectable on a per-port or per-card basis, the TE220 allows E1 and T1 circuits to be mixed with full channel synchronization. |
 |
|
|
Digium Wilcard TE220B Digium's TE220B PCI Express card provides termination of up to 60 channels of voice or data across two E1, T1, or J1 interfaces in a PCIe x1 form factor. Selectable on a per-port or per-card basis, the TE220 allows E1 and T1 circuits to be mixed with full channel synchronization. |
 |
|
|
| Digium Wildcard TE212P The TE212P is a bundling of our leading TE210P product and our new VPM450M Octasic DSP-based echo cancelation module. The TE212P is Digium's and the industry's first two-port digital card featuring hardware-based echo cancelation. |
 |
|
|
|
The TE210P is the next generation of Digium hardware that improves performance and scalability through bus mastering architecture. The TE210P supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. |
 |
|
|
| Digium Wildcard TE207P The TE207P is a bundling of our leading TE205P product and our new VPM450M Octasic DSP-based echo cancelation module. The TE207P is Digium's and the industry's first two-port digital card featuring hardware-based echo cancelation. |
 |
|
|
Digium Wildcard TE205P The TE205P is the next generation of Digium hardware that improves performance and scalability through bus mastering architecture. The TE205P supports both E1 and T1/J1 environments and is selectable on a per-card or per-port basis. |
 |
|
|
| Digium Wildcard TE120P The Wildcard TE120P is a high-performance, cost effective digital telephony interface card with the power to create a seamless network, interconnecting traditional telephony systems with emerging Voice over IP technologies. |
 |
|
|
Digium Wildcard TE110P The Wildcard TE110P brings a high-performance, cost-effective, and flexible single span togglable T1/PRI or E1/PRI interface to the Digium line-up of telephony interface devices. The TE110P is a single span, selectable T1 (24-channel) or E1 (32-channel) card that supports all the functionality of our quad T1/E1 card. This card supports both voice and data modes on its single span. |
 |
|
|
| Digium Wildcard VPM450M The Digium TE407P and TE412P are the next generation of Digium hardware that offer on-board Octasic echo cancellation, each compatible with a 5.0-volt and 3.3-volt slot respectively. |
 |
|
|
|
The Wildcard TDM2400P is a full-length PCI 2.2-compliant card that supports FXS and FXO station interfaces for connecting analog telephones and analog POTS lines through a PC. Using Digium's Asterisk Open Source PBX software and standard PC hardware, one can create a SOHO (Small Office Home Office) telephony environment that includes all the sophisticated features of a high-end business telephone system. |
 |
|
|
Digium Wildcard TDM400P The Wildcard TDM400P is a half-length PCI 2.2-compliant card that supports FXS and FXO station interfaces for connecting analog telephones and analog POTS lines through a PC. Using Digium's Asterisk Open Soruce PBX software and standard PC hardware, one can create a SOHO (Small Office Home Office) telephony environment that includes all the sophisticated features of a high-end business telephone system. |
 |
|
|
Digium TDM400P FXO Module The FXO module allows the TDM400P card to termiante analog telephone lines (POTS). Because of the modular design, a user can activate additional ports at any time with more FXS or FXO daughter cards. The FXO module passes all the call features any standard analog telephone line will support. Worldwide certifications are pending. |
 |
|
|
Digium TDM400P FXS Module The FXS module allows the TDM400P card to terminate analog telephones. Because of the modular design, a user can activate additional ports at any time with more FXS or FXO daughter cards. The FXS module passes all the call features any standard analog telephone will support. |
 |
|
|
Digium Asterisk Developers Kit The Asterisk Developer's Kit PCI features our TDM400p with two modules: one FXS and one FXO. This kit is ideal for students or IT developers needing a simple system to begin working with the Asterisk platform and still have the ability for upgrading in the future. |
 |
|
|
Asterisk Appliance Developer Kit Featuring the first Digium developed Asterisk GUI framework, the Asterisk Appliance will bring small to medium enterprises a feature-rich, cost-effective, reliable telephony solution. Digium Asterisk is providing the unique opportunity to obtain an Asterisk Appliance with the purchase of an Asterisk Appliance Developer Kit. |
 |
|
|
| Digium S101I
IAXY The Digium S101I, affectionately known as the IAXy, takes Asterisk from the PC to the CPE. The IAXy provides a single, fully featured FXS interface with an Ethernet back-end, speaking the Asterisk-native IAX protocol, at a highly competitive price. The IAXy is aimed at Voice Over Broadband and Internet Telephone Service Providers. |
 |
|
|
Digium, the leader in open source telephony, announces Asterisk Business Edition, a professional-grade version of its acclaimed open source PBX for the Linux operating system. This version provides tested reliability of critical functions and features, tailored for small- and medium-sized business applications. |
 |
|
|
|
|
| CLICK HERE TO MAKE AN ENQUIRY or contact us at our Keison UK or USA offices |
|
 UK OfficePO Box 2124, Chelmsford, CM1 3UP England Tel: +44 (0)1245 600560 Fax: +44 (0)1245 600030 Email: info@keison.co.uk |
 USA Office233 Rogue River Highway #425, Grants Pass Oregon 97527-5429, USA Tel: +1 541 956 9929 Fax: +1 541 610 1646 Email: info@keison.com |
 |
|
| Home | Translate | Products | Catalogue | Enquiries | Links | Sitemap | Link to Us | ISO9001 | |
 © Copyright 2005 Keison International plc - All Rights Reserved  e-mail this product to a friend! |
|