Simple installation and commissioning Installation is simple!
The detector is easily installed with a stainless steel mounting bracket; this can be rotated to ensure opti-mum positioning of the detector in relationto the potential fire source. Angular mark-ings allow the positioning angles of the detector to be recorded for future reference.

Detector flexibility
As well as a 4 to 20 mA output and 3relays, an optional RS 485 output is also available, which can be multi-dropped to acentral location. This provides a number of options for detector monitoring and the triggering of the necessary control actionupon the detection of a fire.

Automatic and manual optics checks
Automatic checks of the detector electron-ics and optics ensure no fault goes unde-tected. Additionally the test can be trig-gered manually at anytime.

Isolated 4 to 20 mA as standard
Complete flexibility enables the detector tobe operated from a separate power supply (as a 4 wire device) or as a 3 wire device where there is no requirement for an isolat-ed output.

Easily visible status LEDA tri-coloured LED which is visible at thefront of the detector provides a simple sta-tus indication to personnel in close proxim-ity to the detector. Green indicates normal operation; yellow indicates a fault and redindicates the presence of radiation.

False alarm immunity
The Dräger Flame 2300 provides the high-est level of false alarm immunity. This is because the detector requires both IR and UV sensors to alarm before the detector will itself output an alarm condition andsuch action ensures that false alarms are all but non-existent.

Worldwide Approvals The Dräger Flame 2300 can be usedworldwide with the following approvals:ATEX, IECEx, FM and CSA.

Flame 2300 Brochure