| The Dräger Flame 1300 is an IR flame detector, designed for the detection of organic based fires such as hydrocarbon fuels and vapours. The detector provides flexibility with its numerous output modes, and advanced design features ensurereliability in the detection of fires whilst at the same time providing excellent immunity to potential false alarm sources.
Simple installation
Installation is simple! The detector is easily installed with a stainless steel mounting bracket; which can be rotated to ensure optimum positioning of the detector in relation to the potential fire source. Angular markings allow the positioning angles ofthe detector to be recorded for future reference.
Detector flexibility
As well as a 4 to 20 mA output and 3 relays, an optional RS 485 output is also available, which can be multi-dropped to acentral location. This provides a number ofoptions for detector monitoring and the triggering of the necessary control action upon the detection of a fire.
Automatic and manual optics checks
Automatic checks of the detector electron-ics and optics ensure no fault goes unde-tected. Additionally the test can be trig-gered manually at anytime.
Isolated 4 to 20 mA as standard
Complete flexibility enables the detector tobe operated from a separate power supply(as a 4 wire device) or as a 3 wire device where there is no requirement for an isolat-ed output.
Easily visible status LEDA tri-coloured LED which is visible at the front of the detector provides a simple status indication to personnel in close proximity to the detector. Green indicates normal operation; yellow indicates a fault and red indicates the presence of radiation.
Worldwide Approvals
The Dräger Flame 1300 can be used worldwide with the following approvals: ATEX, IECEx, FM and CSA.
Flame 1300 Brochure
|
