| The Dräger Flame 1700 is an UV flame detector, designed for the detection of non-organic based fires such as hydrogen and metals as well as organic based fires.The detector provides flexibility with its numerous output modes, and advanced design features ensure reliability and speed in the detection of such fires.
Simple installation
Installation is simple! The detector is easilyinstalled with a stainless steel mountingbracket; this can be rotated to ensure opti-mum positioning of the detector in relationto the potential fire source. Angular mark-ings allow the positioning angles of the de-tector to be recorded for future reference.
Detector flexibility
As well as a 4 to 20 mA output and 3relays, an optional RS 485 output is alsoavailable, which can be multi-dropped to acentral location. This provides a number ofoptions for detector monitoring and thetriggering of the necessary control actionupon the detection of a fire.
Automatic and manual optics checks
Automatic checks of the detector electron-ics and optics ensure no fault goes unde-tected. Additionally the test can be trig-gered manually at anytime.
Isolated 4 to 20 mA as standard
Complete flexibility enables the detector tobe operated from a separate power supply(as a 4 wire device) or as a 3 wire devicewhere there is no requirement for an isolat-ed output.
Easily visible status
LEDA tri-coloured LED which is visible at the front of the detector provides a simple status indication to personnel in close proximity to the detector. Green indicates normaloperation; yellow indicates a fault and redindicates the presence of radiation.
Worldwide Approvals
The Dräger Flame 1700 can be usedworldwide with the following approvals: ATEX, IECEx, FM and CSA.
Flame 1700 Brochure
|
