Flexibility through sensor variety
The extensive portfolio of over 25 different DrägerSensors allows the detection of more than 100 gases and vapors. The measuring range of the EC, Cat-Ex and IR sensors can be changed to another gas within a list of gases by a push of a button - without the necessity of re-calibrating. This way the accuracy and the range of the monitored substances is increased. DragerSensors are renowned for fast response, minor cross sensitivities, high accuracy and long life.
Intelligent and interchangeable sensors
Each sensor is recognized automatically by the instrument. All sensors are pre-calibrated, and a reconfiguration of the Drager X-am 7000 is done by simply changing a sensor. I.e. no additional service or maintenance is necessary.
Intuitive software functions
The software menu of the Drager X-am 7000 was designed in partnership with our customers making it simple and easy to use. Functions such as TWA and STEL values, as well as functions, like peak hold can be viewed or switched on quickly and with minimal training.
Leak search functionality
Searching a leak has been revolutionized by the Drager X-am 7000. A new, flexible goose-neck probe simplifies the search for leaks at e.g. flanges, shut-off devices and valves. In the tracking-mode, the instrument generates an increasing or decreasing rate of beeps, depending on the gas concentration detected.
X-am 7000: Leaksearch made easy by generating
audible clicks.
Built for longevity
The completely new design of the rechargeable battery block with intelligent charging management guarantees full functionality of the instrument over a period of up to 20 hours (depending on the battery type). An alcaline battery pack is also available. The DrägerSensors used in the Drager X-am 7000 have a typical life of over 5 years. If, in time, an exchange is necessary, the modular approach of the instrument allows this in a few simple steps.
X-am 7000
|
X-am 7000:Modular, rugged and waterproof.
Rugged and waterproof
Additional to the built-in dust and splash water protection, the Drager X-am 7000 can be submersed without damage. A specially designed rubber-boot protects the instrument against damage from a drop of 1.5 m (5 ft.)
Multiple Warning Systems
Alarm conditions can not be ignored because of the sound of an extremely loud multi-tone horn. In addition the visual alarm can be seen through 360° ensuring it attracts the users attention. By generating a life-signal every six seconds the Drager X-am 7000 confirms it is functioning normally.
Information at a glance
The large graphic Display and the alarm auto-zoom function guarantee easy recognition of the values and symbols displayed for immediate judgement about the situation or hazards. All information is provided in plain text.
Data management
A built-in data memory logs up to 3000 sets of values – that is data logging of 50 hours when recording one set per minute. The data can be transmitted and evaluated on a PC using an infrared interface together with the „GasVision“ software package.
Strong Built-in Pump
The built-in high power pump allows to sample gas through a 45 m (150 ft.) long tube. The operation of the pump is continuously monitored, and the instrument will generate an alarm if the flow is too low.
X-am 7000: High performance pump for professional
confined space entry.
Global Approvals
The instrument carries globally recognized approvals: ATEX, UL and CSA.
|
|
