| esp product range | questions & answers |

Electronic Systems Protection furse
ESP MC Plug-in protection for mains power supplies

Available with British style (three square pin) plugs and sockets only.
Suitable for use on 220-260 volts supplies.

For wire-in applications see here, for supplies up to 16 amps, and here for all other supplies.

Application

ESP Micro Conditioner (ESP MC) can be used to protect all sorts of plug-in equipment:

mini computers
PC, CAD and DTP systems
modems, file servers and other peripherals
EPOS equipment
PBX telephone exchanges
test and measurement equipment

typical installation

Features and benefits

Low let-through voltage restricts the transient voltage reaching equipment to a safe level to ensure maximum protection for your equipment.

Protection between all sets of conductors, closes all transient paths to equipment, for complete protection.

Inter-outlet protection ensures that transients caused by one device do not affect the others.

Designed to provide repeated protection in lightning intense environments - 20 year predicted lifetime.

ESP MC


 ESP MC
Our Price - GBP 211.63
This is our special discounted online price.


Protects against radio frequency interference.

Rugged, heavy duty construction.

Convenient fixing holes for flat mounting to walls or workstation sides.

Simply plug it in to install.

No maintenance.

5 year warranty.


typical installation

Installation

Simply plug the ESP MC into the mains and your equipment into the ESP MC.

PDF

ESP MC Brochure
Electrical specification

 
ESP Micro Conditioner
Nominal voltage (RMS)
220/230/240V
Working voltage (RMS)
260V maximum
Frequency range
40 - 60Hz
Current rating (supply)
13A
Leakage current (to earth)
<0.5mA
RFI insertion loss
Attenuation commences below 10KHz, exceeding 70dB at 3 MHz (BS613)
Transient specification

 
ESP Micro Conditioner
Let-through (all conductors)¹
6kV 0.5µs 100MHz ring wave, 200mA to:
IEEE C62.41-1991² Location Category A3
AS1768-1991 Appendix B, Category A
35V³
6kV 1.2/50µs open circuit voltage, 500mA short circuit current to:
BS 6651:1999 Appendix C, Category A-high
UL1449 mains plug-in
555V


1 The maximum transient voltage let-through the protector throughout the test (+/-5%), phase to neutral, phase to earth and neutral to earth.
2 Formerly IEEE 587 and ANSI C62.41.
3 This let-through voltage represents a deviation from the applied mains voltage, present at the time of the test.
Mechanical specification

 
ESP Micro conditioner
Temperature
-25°C to +70°C
Connection type
Via British style three square pin plug and socket to BS 1363
Earth connection
via plug and socket
Weight
-unit
-packaged

1.70kg
1.75kg
Directions
Mechanical specification

 

| esp product range | questions & answers |