| 
Suitable for use on ten line LSA-PLUS connection strips.
For PSTN and U interface
ISDN lines use ESP KT1 and ESP K10T1.
For S/T interface ISDN
lines use ESP KT2 and ESP K10T2.
Protect single lines with
ESP KT1 or ESP KT2.
Protect all ten lines
on a connection strip with ESP K10T1 or ESP K10T2.
For individual telephone lines
and lines at unmanned sites the high performance ESP
TN , ready-boxed derivative ESP TN/BX or ESP
TN/2BX, or plug-in ESP TN/JP or ESP TN/RJ11
should be used.
Application
Use these units to protect PBX telephone exchanges,
ISDN and other telecom equipment with LSA-PLUS connections. Install protectors
on all lines that enter or leave each building (including extensions to
other buildings).
Features and benefits
 Low
cost protection for large numbers of telephone lines.
Low
let-through voltage reduces the transient voltage reaching equipment to
a safe level.
Protection
between all sets of conductors to close all transient paths to equipment.
Multiple
strike protection, with the ability to protect against at least ten 5kA
transients (test to ITU K20).
Quick
and easy plug-in installation.
|
Colour
of housing distinguishes electrically different protectors, to help avoid
confusion when installed together on the same distribution frame.
At larger
installations ESP K10T1/2 provide all in one protection for all ten lines
on a standard LSA-PLUS distribution strip for extra quick and easy installation.
ESP
KT1/2 allow you to protect only the lines you need.
Ridged
finger holds make it easy to obtain a firm grip for installation or removal.
Trouble
free earthing via the ESP KE10 for the ESP KT1/2 (ESP K10T1/2 have an
integral earth connection making the ESP KE10 unnecessary).
Straightforward
installation instructions.
UK Oftel
Approval NS/G/1235/W/100025.
5 year
warranty.
|
