| technical handbooks | esp product range | questions & answers | furse news | introduction |

Electronic Systems Protection furse

Furse ESP products are now available from the online catalogue click here
ESP 06Q, ESP 15Q, ESO 30Q, ESP 50Q, ESP TNQ and ESP RTDQ High density data, signal and telephone line protectors
Electrical Specification

ESP 06Q ESP 15Q ESP 30Q ESP 50Q ESP TNQ ESP RTDQ
Nominal voltage
(note 1)
6V 15V 30V 50V * 6V
Maximum working voltage
(note 2)
7.78V 18.8V 37.8V 57.8V 190V 7.78V
Current rating (signal) 750mA 750mA 750mA 750mA 300mA 700mA
In-line resistance
(per line +/-10%)
1.0 ohm 1.0 ohm 1.0 ohm 1.0 ohm 4.3 ohm 1.0 ohm
Bandwidth
(-3dB 50ohm system)
1MHz 2.5MHz 4MHz 6MHz >50MHz 800kHz
1 Nominal voltage (DC or AC peak) measured at <5µA (ESP 15Q, ESP 30Q, ESP 50Q) and <200µA (ESP 06Q, ESP RTDQ).
2 Maximum working voltage (DC or AC peak) measured at <5mA leakage (ESP 15Q, ESP 30Q, ESP 50Q)), <10mA (ESP 06Q, ESP RTDQ) and <95µA (ESP TNQ).
Transient Specification

ESP 06Q ESP 15Q ESP 30Q ESP 50Q ESP TNQ ESP RTDQ
Let-through voltage - all conductors
(note 1)
5kV, 10/700µs test to:
BS 6651:1999 Appendix C, Cat C-High
ITU (formely CCITT) IX K17
10.8V 26.2V 44.3V 65.8V 200V 10.5V
Maximum surge current (note 2)
per signal wire
per pair

10kA
20kA

10kA
20kA

10kA
20kA

10kA
20kA

10kA
20kA

10kA
20kA

1 The maximum transient voltage let-through the protector throughout the test (+/-10%) line to line and line to earth. Response time <10ns.
2 Pin 1 connected to earth/shell. 3 Tested with 8/20µs waveshape to ITU (formely CCITT), BS 6651:1999 Appendix C.

Mechanical Specification

ESP 06Q ESP 15Q ESP 30Q ESP 50Q ESP TNQ ESP RTDQ
Temperature range -25°C to +70°C -25°C to +70°C -25°C to +70°C -25°C to +70°C -25°C to +70°C -25°C to +70°C
Connection type Plugable 12 way screw terminal
Conductor size (stranded) 2.5mm2 2.5mm2 2.5mm2 2.5mm2 2.5mm2 2.5mm2
Earth connection Via DIN rail or M5 threaded hole in base of unit

Dimensions
Dimensions

PDF

ESP Q Brochure

previous page
Furse ESP products are now available from the online catalogue click here

| technical handbooks | esp product range | questions & answers | furse news | introduction |

Site Map | Enquiry Form | Translate
ISO 9001
More Information
UK UK Office
Tel: +44 (0)1245 600 560
Fax: +44 (0)1245 808 399
Email: info@keison.co.uk
USA USA Office
Tel:
+1 541 956 9929
Fax: +1 541 610 1646
Email: info@keison.com
Germany German Office
Tel:
+49 761 4787 184
Fax: +49 761 4787 100
Email: info@keison.de
ISO 140001
More Information


© Copyright 2008 Keison International Ltd - All Rights Reserved