The Furse MMP Series protectors are suitable for use on single or three phase mains supplies and power distribution systems.

The varistor based design eliminates the high follow current (If) associated with spark gap based surge protection.

  Type 1 (Class I/Class B) protectors
  For protecting against partial direct or indirect lightning strikes
  Redundancy, indicates if unit is partially or fully damaged

Application

Use on single or three phase mains supplies and power distribution systems for protection against partial direct or indirect lightning strikes.

Features and Benefits

  The varistor based design eliminates the high follow current (If) associated with spark gap based surge protection
  Two red indicators show when the protector requires replacement
  If only one indicator is displayed then there is still limited protection offered by the unit
  This indication can also trigger a remote signal contact to interface with a building management system.Please use ‘/S’ after the part no. to order the remote indication (normally-open) contact version