| HED
high temperature bath / circulators are designed to provide stable,
uniform temperature control for high temperature applications
Stability ± 0.5C, uniformity ± 0.25C
 good long-term temperature
stability and uniformity are provided by a combination of the electronic
control system and the proven Grant circulation system
each bath consists of a heavily insulated stainless steel tank housed
in a stove-enamelled outer case, with a control unit mounted over one
end of the bath from which heater, stirrer and temperature sensors project
down into the bath; a circulation tray enhances the performance, and
an insulated flat lid is supplied for maximum user safety
HQ pumps are designed
for circulating temperature controlled liquid around external apparatus.
for circulation through
closed systems only
HED bath/circulators are specially designed for use with high temperature
liquids; to avoid local overheating and rapid deterioration of the liquid,
the stirrer is very powerful and the heater has a very large surface
area, to prevent localised overheating of the oil.
the control unit
is raised to allow for a cooling airflow above the tank
|
High temperature bath circulators
exposed or immersed parts are made from stainless steel, nickel-plated
copper or appropriate plastics, to minimise the risks of corrosion
HED bath/circulators
are robust and reliable, for long-term durability
adjustable overtemperature
cut-out
float switch for
low liquid level protection
separate drive motor,
so there is no need to switch the pump on until the required operating
temperature has been reached and the viscosity of the liquid is low
enough for pumping
lid-mounted for convenient
fitting and use
flow and return fittings
are suitable for temporary or permanent connection (using 9mm internal
diameter pipe)
|
