|
|
Home › Environmental › Power Analysers › Hawk 5000 Energy Analyser
Hawk 5000 Energy Analyser
|
The Hawk 5000 is a logical and cost effective answer to the problem of energy analysis.
Its portability ensures that it can be used for site surveys and special monitoring tasks without disruption to supplies or processes. It is equally suitable for helping to manage energy consumption as it is for determining the status of the supply infrastructure.
It monitors supply and consumption by means of safe non-contact current transformers. These can be placed around conductors without the need to switch off the power and without the need for live electrical contact.
The Hawk 5000 is simple to use and its integral status indicators confirm correct operation and highlight corrective actions.
The system software is Windows compatible and mouse driven.
To enable all energy profile to be monitored the Hawk 5000 accepts inputs from any meter with pulse output facility. So, water, gas and other parameters can be recorded.
With its portability, ease of use and comprehensive analysis software, the Hawk 5000 gives you the power to manage.
Manual
|
TO MANAGE YOUR POWER SUPPLY INFRASTRUCTURE YOU NEED TO KNOW:
 The maximum demand on each circuit
The installed supply capacity
The balance of power between phases
IF YOU ARE GOING TO REDUCE YOUR ENERGY COSTS YOU NEED TO KNOW:
When, where and how much power is consumed
Why peak demands occur
Your power factor
Your tariff options
HAWK 5000 MEASURES AND RECORDS:
Single or 3 Phase Power
kW, kVA, KVAr, KVArl, Power Factor
TRMS Amps, TRMS Volts, Frequency
The integration period over which the measurements are averaged can be set as required from two seconds to two hours.
|
|
Clamp-on Current
Transformers
Only top quality high accuracy
clamp-on current transformers with integral overload protection and
negligible phase angle error are supplied with the Hawk 5000.
|
Sturdy Hawk 5000 Carrying Case
Each Hawk 5000 analyser comes complete with a smart, weather resistant carrying
case with separate compartments for accessories and consumable spares. |
Pulse Inputs Accessory
A variety of devices with pulse outputs may be used with Hawk 5000 energy analyser. Examples
are electricity meters, flowmeters and gas meters. |
Integral Phaser Accessory
This allows phase synchronisation to be quickly achieved without the
need to make any live voltage connections. |
| Hawk 5000 Specifications |
| ANALOGUE MEASUREMENT CAPABILITY PER PHASE: |
Single or three phase power: kW, kVA, KVAr, KVArl, Power Factor, TRMS Amps, TRMS Volts, Frequency. |
| TRUE RMS MEASUREMENT |
Voltage and currents sampled at 10,000 samples per second. True and apparent power individually calculated. |
| INTEGRATION PERIOD |
User selectable: 2 seconds to 2 hours. |
| MONITORING METHOD: |
Current: via clamps with a.c. current output max. 1 amp output. Clamp ratio user defined. Voltage via mains input to Hawk 5000. |
| STORAGE CAPACITY: |
Displayed on screen as survey parameters are defined. Maximum detail; 30 min. periods; seven weeks. |
| STATUS INDICATORS: |
Mains on this phase
Current/No current on this phase
CT reversed or wrong phase
Pulses detected
Phaser
Comms active
Logging active |
| SYSTEM ACCURACY: |
Better than 2% using CT1000 clamps |
| MINIMUM ACCURATELY MEASURABLE CURRENT: |
Typically 0.4 Amps using 1000:1 CT Clamps |
| PULSE INPUT ACCURACY: |
+/- 1 pulse. |
| DATA COMMUNICATIONS |
RS232, 9600 baud, error corrected. |
| POWER SUPPLY |
180 to 263v rms, 40 to 65 Hz |
| DIMENSIONS: |
285W x 223D x 65H |
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
Back To Last Page
|
Dust Monitors
