Home › Gas Analysers › Safety › Honeywell Analytics INeotox XL Oxygen Analyser
This detector is now obsolete. The Measurement
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
Honeywell Analytics Neotox XL Oxygen Analyser
Features
Personal single gas monitor with backlit display
Simple operation with audible and visual alarms
Optional integral datalogging
Dry cell or rechargeable battery options
Benefits
Reduces gas usage when used to set combustion
Allows accurate setting of Air/Gas ratio
Accurate pre-burn values with no interaction with cooling wind
The unit is supplied with integral sample pipes and fittings,
allowing the unit to be connected into the rear of the burners
on a 400 series Air/Gas combustion system.
Some older methods previously measured the exhaust gases but with
modern day forehearths using forced draught cooling, this method
is fast becoming an inaccurate methodology.
With just a sample of 300ml/min the combustion mix can be tested
at the rear of the burner, giving the most accurate sample.
With this sample reading the combustion system can be adjusted
to gain the stoichiometric ratio of the gas used allowing for the
best fuel efficiency and the lowest emmissions.
Typically electrochemical cells are used for oxygen detection.
These operate by producing a small voltage when the lead
inside the cell is oxidised.
The voltage is proportional to the amount of oxygen present.
The product listed provides a relatively low cost, reliable
and long-life solution to the Problem of oxygen monitoring.