|
|
Isotech Hyperion R
We are proud to bring you the Isotech Hyperion R a low temperature black body source
The Isotech Hyperion R Calibration Bath comprimises a blackbody cavity for calibration of raidiation pyrometers. A key feature to the Hyperion R is that its operation range includes ambient temperature.
The temperature of the furnace is set on a controller, whilst an independent indicator, whose sensor fits into the cavity of the Isotech Hyperion R, indicates the actual radiance temperature. The sensor can be removed for external calibration or the whole system can be calibrated.
The temperature of the Hyperion R can be set to with 0.1ºC at any point from -10ºC to +80ºC
The Hyperion R is an elegant, modern-styled range designed to work well from a series of Peltier modules, which can be used to either to heat or cool a metal block. A specially programmed microprocessor-based controller offers a unique concept in the way of calibration sources
With the Isotech Hyperion R, a temperature above, below or at ambient temperature can be set and will be maintained whether the source needs cooled or heated.
Traceablity of the Isotech Hyperion R may be established with a UKAS certificate for the in-built indicator and supplied probe.
|
|
Model No. |
982 |
Temperature Range. |
-10ºC to 80.0ºC |
Emissivity. |
Greater than 0.995 |
Stability. |
±0.1ºC |
Display Resolution. |
0.01ºC |
Cavity Size. |
50mm diameter
150mm deep |
Time to Temperature |
45 mins to -10ºC
40 mins to 80º C |
Power |
200 Watts typical
100-130 or 208-240 VAC
50/60Hz
|
Dimensions |
Height 310mm
Width 265mm
Depth 200mm |
Weight |
10kg |
Options |
|
935-14-13 |
Probe |
931-22-27 |
Carrying Case |
812-01-06 |
Set of 4 orifice plates to restrict cavity aperture diameter to 40mm, 30mm, 20mm or 10mm |
|
Now Includes PC interface and Windows software as standard. |
|
For additional information, please click here to view our Data Sheet
Please
note - Product designs and specifications are subject to change without
notice. The user is responsible for determining the suitability of this
product.
Back To Last Page
|
|
|
|
| Contact Us | Enquiry Form | Company Information |
We are open Monday to Friday, from 9.30 - 5.30 GMT.
© Copyright 2010 Keison International Ltd - All Rights Reserved
|
