MSA Vautex Elite S Gastight Chemical Protective Suit

Home › Safety Wear › MSA Vautex Elite S Gastight Chemical Protective Suit

Single piece body chemical protective suit with gas tightly attached and replaceable boots and glove system. The suit material is composed of:

Outside elastomer surface
Multilayer film laminate
Elastomer intermediate layer
Polyamide carrier fabric
Inside butyl surface

The Vautex Elite S offers reliable protection against gases and vapours, solid and liquid chemicals as well as radioactive contamination.

The Models:

Vautex Elite S

The full face mask and the compressed air breathing apparatus are worn inside the suit.

Vautex Elite S GALLET

Same suit as the Vautex Elite S but incorporating a plastic plate for helmet positioning and a shorter zipper in the head section to accommodate the MSA GALLET helmet.

Vautex Elite S Expert

The economic version for the user with seldom use, which do not require replacing the lens. For this reason the lens is firmly integrated into the suit. This reduces the weight of the head.

Vautex Elite S Dual

This suit version combines the benefits of an applied compressed air line system with those of a selfcontained breathing apparatus. The Dualsystem is capable of switchingfrom a breathing apparatus to a compressed air line system and back again. It consists of an Automatic Switch Valve [ASV] and an air distributor inside the suit. This sophisticated system ensures mobility, extended service time, comfort and enhanced safety when the air line system fails.

Vautex Elite S GALLET Dual

Same suit as the Vautex Elite S Dual but incorporating a plastic plate for helmet positioning and a shorter zipper in the head section to accommodate the MSA GALLET helmet.

All suits features the following properties:

High chemical resistance
Good mechanical stability
Increased resistance against flame impingement
Backside with removeable back padding
Gastight zipper
Integrated transponder

Applications

Chemical
Hazardous Materials
Nuclear Industry
Oil & Gas
Pharmaceuticals
Power Plants & Electricity
Waste & Water Treatment

Approvals & Standards

prEN 943, part 1
PPE directive 89/ 686/ EEC [category 3]

Hazards

Chemical Splash
Particles & Dust
Smoke
Toxic Atmosphere (IDLH)
Toxic Atmosphere (Non-IDLH)

Datasheet

Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.

Back To Last Page

Want A Quotation?

Please fill out the following fields and we will e-mail you a quotation shortly.

More Information

UK Office
Tel: +44 (0)1245 600 560
Fax: +44 (0)1245 808 399
Email: info@keison.co.uk

USA Office
Tel: +1 541 956 9929
Fax: +1 541 610 1646
Email: info@keison.com

More Information