|
|
|
|
OpenvoxOpenVox is dedicated to provide Open Source Computer Telephony hardware and software products. With more than 5 years's Computer Telephony product design and service experience. All our hardware products is ready to be used with leading open source telephony projects including Asterisk. End user can build advanced but affordable telephony systems themselves. Now we are in process of extend our software and hardware product line. Please check our site more often for new products. |
|
 |
|
| D410P 4 Port E1/T1 PCI Card with BusMaster The D410P supports E1, T1 and J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1 and T1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. |
 |
|
|
| D210P 2 Port E1/T1 PCI Card with BusMaster The D210P supports E1, T1 and J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1 and T1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. |
 |
|
|
D110P Digital Line Voice Board The Openvox D110p is a high-performance, cost-efective signal span digital voice card.  100% hardware compatible with TE110P. Use same device driver without any modification. RJ-45 shielded connecter. |
 |
|
|
B400P Quad S/T BRI Interface Card The B400P is a PCI 2.2 compliant card supporting 4 BRI S/T interfaces, with a onboard mulit NT powerfeeding circuit. NT/TE mode can be independently configured on each of the 4 ports. The B400p can be used for building Open source Astersik based system, such as ISDN PBX, Voip gateway…. |
 |
|
|
A1200P Modular Analog Interface The Openvox A1200P have 3 RJ45 socket on the bracket. Each jack has 4 coresponding module installed, positioned on the mother board. High Quality at Low Price. World Wide Usable: Configurable line interface to meet global telephone line interface requirements. Firmware accelerates I/O access to achieve high stablity and highly decreased CPU payload |
 |
|
|
A400P Modular Design: Up to 4 FXS, FXO or mixed FXS/FXO ports. Scalable: Just add additional cards to extend system. Easy to use : Full software and hardware compatible with digium's TDM400P.* Module Pin to Pin compatible with X100M and S100M |
 |
|
|
|
 |
|
|
FXS 100 Module The Openvox FXS-100 module allows the A-400PCI card to terminate analog telephones. Because of the modular design, a user can activate additional ports at any time with more FXS-100 or FXO-100 daughter cards. |
 |
|
|
| CLICK HERE TO MAKE AN ENQUIRY or contact us at our Keison UK or USA offices |
|
 UK OfficePO Box 2124, Chelmsford, CM1 3UP England Tel: +44 (0)1245 600560 Fax: +44 (0)1245 600030 Email: info@keison.co.uk |
 USA Office233 Rogue River Highway #425, Grants Pass Oregon 97527-5429, USA Tel: +1 541 956 9929 Fax: +1 541 610 1646 Email: info@keison.com |
 |
|
| Home | Translate | Products | Catalogue | Enquiries | Links | Sitemap | Link to Us | ISO9001 | |
 © Copyright 2005 Keison International plc - All Rights Reserved  e-mail this product to a friend! |
|