- INDUSTRIES
- Sewage Treatment
- Industrial Waste Water
- Paper and Pulp
- Mine and Quarry Water Processing
- Food and Beverage Effluent
- APPLICATIONS
- Settlement Tanks
- Clarifiers
- Sludge Thickeners
- Filtration Systems
- Final Effluent Monitoring
- FEATURES
- Weatherproof enclosure
- Volt free output relay
- LED indication of relay state
- Set point adjustment
- Adjustable time delay
- BENEFITS
- Pollution Warning
- Automatic warning of filter failure
- Improved sludge blanket consistency
- Reduction of pumping costs
- Automatic tank desludging
|
The 8100 and 8200 monitors provide a simple method of detecting the
sludge blanket in settlement tanks or increasing levels of suspended
solids or sludge density in a large range of processes. In many applications
analogue display of the measured value is not essential, the 8100 and
8200 monitors have been designed to satisfy this requirement and provide
a single or dual relay output signal. The output can be used to control
pumps or valves and can interface directly with telemetry, PLC and SCADA
systems.
The 8100 and 8200 monitors are suitable for mounting outdoors, often on the bridge of settlement tanks. The enclosure is IP65 rated and no outer enclosure is necessary . Provision must be made for transmission of the output signal to the control system , this is normally possible via spare slip rings. Where this is not possible a radio telemetry option is available, allowing transmission directly to the control system without the need for installation of cables.
The 8100 version of the controller provides a single alarm point and works with a single sensor. The 8200 version version has two outputs and works with two sensors. It is possible to use the 8200 to provide alarms at two points within a single tank or to control two separate tanks, the sensors can be of different types. The 8100 and 8200 monitors will work with any of the Partech infrared or ultrasonic sensors.
Partech 8100 8200 Brochure
|
| Electrical Information
|
| Power Supply |
115/230 VAC, 50/60 Hz, +10 -15%
12/24 VDC option available
|
| Power Consumption |
8 W |
| Contact Type |
SPCO volt free contacts |
| Output Relay Rating |
2A @ 240 VAC, 4A @ 110 VAC, 5A @125 VDC |
| Terminals |
Max conductor cross section 2.5 mm2 |
| EMC Conformity |
EN 50081, EN 50082 |
| Set Point Adjustment |
10 to 90% of sensor range |
| Time Delay Adjustment |
1 to 60 seconds |
| Hysterisis for Set Point |
1% of sensor range |
| Physical Features,
Field Mount |
| Enclosure Material |
Polycarbonite |
| Enclosure Dimensions |
190 x 190 x 130 mm (h x w x d) |
| Weatherproof Rating |
IP65 |
| Cable Entries |
1 x M13 (for sensor cable)
2 x M16 (for power input and signal output)
|
| Weight |
1 kg |
| Operating temperature |
-20 to +60°C |
| Ordering Information
|
| Part Number |
Description |
| 05158600 |
8100 Configured for IR Sensor |
| 05158610 |
8100 Configured for US Sensor |
| 05163600 |
8100 Configured for IL55 Sensor |
| 05158620 |
8200 Configured for IR Sensor |
| 05158630 |
8200 Configured for US Sensor |
| 05163610 |
8100 Configured for IL55 Sensor |
| 05101190 |
8100 Mounting Bracket |
| 05101260 |
8200 Mounting Bracket |
