|
|
Home › Environmental › Waste Water Analysis › Turbi-Tech 2000LA Suspended Solids Sensor

Turbi-Tech 2000LA Suspended Solids Sensor
The Turbi-Tech 2000LA Sensor has been designed for use in aeration
systems typically monitoring Mixed Liquor Suspended Solids also
known as Activated Sludge where solids are typically in the range of
1,500 to 3,500 mg/l. The sensor can also measure Returned Activated
Sludge (R.A.S.), Surplus Activated Sludge (S.A.S.) and Suspended
Solids or Turbidity in any higher range application.
The extended range version of the sensor is suitable for monitoring
solids in Sequence Batch Reactors (S.B.R.) and similar processes
where solids levels can be as high as 30,000 mg/l.
The large optical surface and sample volume combine to ensure that
the sensor is providing information that is reliable and representative of
the solids present in the process. Deposits of fats and grease on the
sensing area do not prevent the sensor from measuring unlike sensors
with small optical surfaces.
In addition the sensor incorporates a self cleaning mechanism that
ensures that the optical surfaces are kept clean at all times, the
cleaning system is designed to avoid problems with ragging and does
not smear the optical system. The cleaning system ensures that
manual intervention on a routine basis is not required, the sensor
should simply be checked as part of general site housekeeping.
The Turbi-Tech 2000LA Sensor
uses Infrared Light at 860 nm and
operates using the Light Attenuation
Principle. The optics are housed
cylindrical glass tubes that are
moved past a set of polyurethane
wipers seals to carry out the
cleaning process. The cleaning
mechanism is then sealed by 2
Nitrile 'H' Rings that finish the
cleaning process. The Nitrile seals
can be exchanged for Viton if the
process media dictates.
The cleaning process is
automatically initiated by the 7200
Monitor at a user determined
frequency. The cleaning process
takes only 90 seconds, which
means that the sensor is available
for 99.5% of the time with a 5 hourly
cleaning cycle.
|

An alternative to fixed installation is
the 740 Portable Monitor which
works with the Soli-Tech 10 Sensor
to monitor both Final Effluent and
Mixed Liquor in a single package.
Associated Products
7200 Monitor
Mounting Brackets
Mounting Shafts
Turbi-Tech 2000LS Sensor
|

Data Sheet
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
Back To Last Page
|
|
|
|
|
|
|
We are open Monday to Friday, from 9.30 - 5.30 GMT.
Keison International Ltd. trading as:
Keison Products, VoIPon Solutions & 4Gon
|
 |
|