FirstCheck+ is the first multigas to combine complete VOC and toxic gas detection from ppb up to 10,000 ppm with traditional multigas sensors for oxygen (O), hydrogen sulphide (H2S), carbon monoxide (CO) and explosive gas (LEL) detection - providing a must have instrument for first responders and confined space entrants.
The instrument's unique, highly sensitive photoionisation detector (PID) enables the detection of many gases that are toxic at low ppb levels and are undetectable by other multigas instruments. Traditionally two to three instruments are needed to ensure workers safety now FirstCheck+ has it all covered in one handheld detector.
FirstCheck+ offers a rapid response enabling speedy assessment of a given situation or incident allowing the appropriate response to be initiated swiftly and smoothly.
Features:
 ppb - 10,000 ppm for unrivalled multigas detection of VOC's and toxic gases
Large numerical back-lit display for easy viewing of readings in adverse conditions
Real time graph display for an instant assessment of readings
Data download via infrared port to a PC for analysis of all 5 sensors output with easy to use software
Health and Safety mode for STEL and TWA monitoring
Display all 5 readings in a graphical or numerical format for simultaneous assessment
Icon driven menu for easy of understanding and to eliminate translation difficulties
Intrinsically safe for use in flammable areas
FirstCheck+ 1000
FirstCheck+ 1000 is the first in our new line of fully upgradeable multigas detectors. It is entry priced, with simple functioning giving you the ability to upgrade throughout the entire FirstCheck+ range as your business needs change. The 1000+ is intrinsically safe and has a detection range of 0.1 - 4,000 ppm on PID and gas. With user set single point alarms and gas table of over 250 gases (including their unique response factors), the 1000+ is equipped to detect a wide range of VOC's.
FirstCheck+ 2000
In addition to the above features FirstCheck+ 2000 benefits from unique data logging capabilities, allowing you to store a minimum of 37 hours worth of data logged readings taken every second (over 130,000 individual readings). FirstCheck+ 2000 utilises a date and time stamp for download to a PC via an IRDA link for detailed analysis and uses Ion PC software (running on Windows XP and Vista). This instrument is a proven ideal tool for indoor air quality and perimeter monitoring applications.
FirstCheck+ 3000
FirstCheck+ 3000 further benefits from the 2000 with an extended detection range of 0.1 to 10,000 ppm on the PID sensor, and an additional operating mode for personnel health and safety monitoring. With pre-programmed STEL and TWA values, FirstCheck+ 3000 provides optimal worker protection.
|
|
FirstCheck+ 5000
Our most sophisticated PID, the FirstCheck+ 5000 is the only instrument available on the market with a dynamic detection range of 1 ppb up to 10,000 ppm. Its versatility allows detection of a greater range of dangerous toxic gases at low ppb levels hazardous to health, as well as flammable gases at LEL thresholds. Coupled with the advanced features of the 3000+, the 5000+ is ideal for the first responder due to its sensitivity, making this instrument a potential life saver across a variety of hazardous environments.
Typical FirstCheck+ applications include:
Emergency first response (including WMD's)
Confined space entry
Pre entry checks
HazMat including WMD's
Industrial
Leak detection
STEL and TWA monitoring
Typical gases detected include:
O2 from 0 to 25 %
CO from 0.1 to 1,000 ppm
H2S from 0.1 to 100 ppm
LEL from 0 to 100 %
VOC's and other toxic gases from ppb to 10,000 ppm including: Ammonia, Some WMD's, Benzene, Ethylene, Isobutanol, Gasoline vapours,
Jet fuel and Liquefied petroleum gas.
|
