| PNEUMATIC
|
| Air Supply |
Dry non corrosive air or gas. The units are not suitable
for continuous liquid exposure |
| Air consumption |
Nil |
| Pressure Ranges |
See ordering information |
| Over pressure |
At least 100% with negligible calibration error, except for
10bar (150psig) models which are 13.5bar (200psig) maximum |
| Connections |
1/8" NPT female |
| PHYSICAL
|
| *Operating Temperature |
-10°C to +60°C |
| *IP Rating |
IP54 |
| Electromagnetic Compatibility |
Compliant and CE marked in accordance with the EC E.M.C directive.
Tested to standards: BS EN50082-2: 1995 BS EN50081-2: 1994 |
| Material of Construction |
Casing: extruded aluminium, zinc diecast end plates; Nitrile
diaphragms. Transducer: composite construction, mainly nickel, aluminium.
Kovar, silicon rubber / gel. PCB: epoxy glass fibre |
| Mass |
200g |
| Mounting |
(1) DIN rail. clips fit TS32 and TS35 rail (2) Direct pipe
mounting |
| Electronic Connection |
Standard - Klippon terminal block to accept cables up to
2.5mm² Weatherproof - 16mm square connector to DIN43650 to accept
cable up to 6mm diameter with conductors of 0.75mm² |
| ELECTRICAL
|
| Supply Voltage |
9-30V Continuous |
| Output |
4-20mA |
| Voltage Drop |
9V min. (across unit) |
| Load resistance |
750 ohms Max. (24V supply) |
| CERTIFICATION
|
|
All units are individually tested and a certificate is supplied
with every unit
Type 68 Brochure
|
DIN
Rail or surface mounting
