HomeLaboratoryTemperature Calibration › Techne Accu-Temp II Laboratory Grade Reference Thermometer


Techne Accu-Temp II Laboratory Grade Reference Thermometer


This product is now obsolete. To see the current Techne range, please click here.

The Tecal Accu-Temp II is a high accuracy multi purpose digital thermometer for both platinum resistance thermometers and thermocouples.

Dual Channel input allows a probe on Channel B to be calibrated against a standard on Channel A - directly compare any combination of PRT and Thermocouple.

The Tecal Accu-Temp II supports 13 thermocouple Types B, E, J, K, N, R, S, T, D, C, l, U, Au/Ptand both 3 and 4 wire 100 ohm Platinum resistance thermometers and RTDs.

  Accuracy of RTD and PRT measurement ?+/-0.010 ?degC
  Accuracy of T/C measurement, better than ?+/-0.1 ?degC
  0.001 resolution for RTDs/PRTs and thermocouples
  2 measuring inputs
  13 thermocouples: B, E, J, K, N, R, S, T, D, C, l, U, Au/Pt
  T/C CJC internal or external
  Input of RTD coefficients: Calendar Van Dusen & ITS90
  Probe self-heat check
  Automatic current reversal for RTDs/PRTs
  Suitable for 3 and 4 wire RTDs/PRTs
  Units?degC,?degF, K, mV, ohms
  Math functions max/min, std. deviation & mean
  Data logging 4000 values
  Expandable by plugging in optional 4 input RTD or thermocouple scanner cards to 1 of 2 rear panel slots available.
  RS232 talk/listen - included
  Rechargeable sealed lead acid battery: 8 hrs operation continuous The powerful math function enables statistical analysis of the captured data, mean, max, min, peak and standard deviation. The Tecal Accu-Temp II can be expanded by adding either a 4 input Thermocouple or 4 input PRT card into one of the two available slots in the rear of the unit.

Ultimately two cards of the same type could be added toallow the measurement of up to 10 sensors of the same type or one PRT as a reference and nine thermocouples. Each unit includes an RS232 cable, NIST traceable calibration, instruction manual and mains cable.

Combine the Tecal Accu-Temp II with one of Techne's Secondary Standard PRTs, a Techne Dry block calibrator liquid calibration bath and Techneworks software to create a thermometer and sensor calibration system with high overall accuracy.


For a larger view, please click on the photo above.

Ordering Information

FACT2PD - Tecal Accu-Temp II thermometer 120 & 240v switchable 5.5kg
FACT2TC - 4 input Thermocouple scanner card 0.9kg
FACT2PC - 4 input RTD scanner card 0.9kg
FACT2LC - Front panel RTD Lemo connector 0.1kg


Data Sheet

Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.

Back To Last Page


Techne

Laboratory

Thermal Cyclers

Dri-Block Heaters

Other

Temperature Calibration

Baths

Fluidised Baths

Industrial Fluidised Baths

Thermoregulators

Dri-Block Calibrators

Thermometers

Want A Quotation?

Please fill out the following fields and we will e-mail you a quotation shortly.