Home › Laboratory › Melting Point Apparatus › Bibby Scientific 1101D and 1102D Mel-Temp Digital Melting Point Apparatus
Bibby Scientific 1101D and 1102D Mel-Temp Digital Melting Point Apparatus
The updated 1101D Mel-Temp Digital Melting Point Apparatus
offers a quick and easy way to measure the melting points
of samples at a budget price. It is ideal for multiple users,
being ergonomically designed to ensure comfortable viewing
for everyone, with a height-adjustable extension arm and a
viewing head that may be rotated to suit each user. As a visual
aid, the viewing head holds a viewing magnifier that offers 8x
magnification.
As a further convenience, the extension arm is completely
collapsible and can be neatly folded away into the unit, so that
the unit can be stored flat to save space.
Each Digital Mel-Temp comes supplied with a complimentary
pack of 50 capillary tubes, its own power supply and power
cable.
The 1101D Mel-Temp has power requirements of 115-120V and
50-60Hz. The 1102D Mel-Temp Digital Melting Point Apparatus
has exactly the same functionality, but has power requirements
of 230-240V; 50-60Hz.
Key Features
Temperature resolution ±1°C
Accommodates 3 Melting point capillaries of
up to 2mm outside diameter
Tube Guide removal forcleaning and use of
cold finger
32-bit Processor
4 x 1 Melt memory capacity
13-key membrane keypad
Performance
Membrane keypad with simple menus for intuitive use
Push button controls are conveniently located to ensure
that temperatures can be recorded without looking away
from the sample
Digital microprocessor with ±1°C resolution provides fast
warm-up and accurate temperature control
Samples in 3 capillary tubes may be viewed simultaneously
Safety and Convenience
3 Audible beeps indicate that the oven temperature is
stable and ready for sample
Adjustable arm with 8x viewing magnifier can be folded
away into the unit
Adjustable object lens for sharp focus
Rotating viewing head and safety eye piece to protect
against glare and hot zone
Integral light and wide angle 8x magnifier enhance
sample observation, so that all 3 samples can be
viewed without eye strain
Units can be calibrated by the user on their site or by
manufacturer/service organisation. If calibrated by the
user, a calibration kit is required.
|
Data Sheet
Manual
Ordering Information
1102D - Mel-Temp Fixed Ramp Rate Model 230V, 50/60Hz, 45W
1101D - Mel-Temp Fixed Ramp Rate Model 115V, 50/60Hz, 45W
1102DX6 - Mel-Temp Fixed Ramp Rate Model 230V, 50/60Hz, 45W with EU plug
AZ9001 - Cold Finger
AZ9002 - Dust Cover
AZ9218 - P-nitrotoluene
AZ9118 - Carbazole (245.61deg) 0.5g
AZ9253 - Calibration Key
AT4042 - Capillary Tubes 1.5mm (10x100 pack)
AT4043 - Capillary Tubes 2.0mm (10x100 pack)
PR2000S - Printer (with connecting ribbon cable)
AT4044 - Paper Roll (2) and ribbon for printer
AZ9220 - 1A PSU Mains lead (UK)
AZ9220X1 - 1A PSU Mains Lead (115V - USA)
AZ9220X6 - 1A PSU mains Lead (European)
|
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
Back To Last Page
|
|