Home › Laboratory › Temperature Calibration › Bibby Scientific CH-5 Chiller Unit
Bibby Scientific CH-5 Chiller Unit
The CH-5 Chiller Unit is designed for use in conjunction with the TECAL 140 H&S Calibrators to
achieve calibration temperatures down to -40°C. Chilled water pumped through the Heatsinks on
the Tecal 140 units to allow the Tecal to reach -40°C.
In normal ambient temperatures of up to 20°C the minimum temperature obtainable with the
TECAL 140 models is 45°C below ambient; by artificially cooling the heatsink of the units with
water from the chiller -40°C can be obtained.
The unit is designed to run on distilled or deionised water.
The CH-5 can also be used to pass cooling water through the cooling coil on the Calibration
Baths (LCB) and Cooling Probe (FDB00CP); minimum temperature +10°C.
Data Sheet Manual
|
For a larger view, please click on the photo above.
Ordering Information
FCH5H - CH-5 230v 50/60hz 320w 26.5kg
FCH5A - CH-5 120v 50/60hz 320w 26.5kg
|
|
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.
Back To Last Page
|
|