Sensor specifications:

  Gas detected: High and low oxygen levels
  Mode of operation: Electrochemical
  Range: 0.1 to 25%
  Alarm set points: 19.5 and 23%
  Accuracy: Better than ± 0.75% O2 over 0.1 to 25% O2
  Response time: 15 seconds
  Warm up time: 10 seconds
  Resolution: 0.1% O2
  Warranty: 1 year

Analyser specifications:

  Analyser type: Fixed
  Power: 230V AC, 110V AC or 24V DC
  Power consumption: <5 VA
  Display: 4 digit LCD
  Operating temperature: 0 to 40°C
  Output options: 4 to 20mA, 2 x relays, 0 to 1V
  Dimensions: 175 x 110 x 75mm (analyser) / 72 x 170 x 45mm (repeater)
  IP rating: IP65 (apart from quick connect repeater which is IP43)
  Warranty: 2 years electrical
  Analyser approvals: EMC Directive 89/336/EEC (EN50270:1999, EN61000- 6-3:2001+A11:2004) Low Voltage Directive 73/23/EEC (BS EN 61010-1:2001, IEC 61010-1(2ed)) AS61610.1-2003 (Australia & New Zealand) CSA (cCSAus), Master Contract 239512, Certificate 1909026

Datasheet