Home › Gas Analysers › Boiler/Flue › Kane 940 Multi-Gas Combustion Analyser
This product is now obsolete and has been replaced by the Kane 945. Features
Big character display Options
High range CO sensor instead of standard CO sensor Optional Extras
Infra red thermal printer Measures:
Oxygen to 21%
This analyser is also compatible with the Kane Fireworks Software.
Kane is now known as Kane International Ltd.Kane 940 Multi-Gas Combustion Analyser
The KANE940 handheld analyser is ideal for
industrial boiler flue gas measurement and
analysis. It operates on all boiler types and
can display 8 parameters simultaneously
showing measurements and calculations of
boiler efficiency and pollution.
The KANE940 has a memory to store up
to 150 readings and can transfer data to a
printer or PC. The printout displays the time
and date of each measurement as well as
personalised information such a s company
name and telephone number.
The KANE940 measures O2, flue and nett
temperature and calculates CO2, boiler
efficiency, excess air and losses. CO is
measured with a hydrogen compensated
sensor for increased accuracy. It also
measures CO and calculates CO/CO2 ratio
- 'The Poison Index' - to give complete
readings for effective boiler analysis and
safety.
The KANE940 measures NO and calculates
NOX. For more accurate pollution analysis an
optional NO2 or SO2 sensor can be fitted at
time of purchase. The high suction double
headed pump allows the analyser to be used
in flues with suction over 100 mbar without
compromising measuring accuracy. The
probe hose is lined with Teflon to reduce
absorption of any sample gases.
The differential pressure sensor can be used
to measure flue draught or be used with a
pilot tube (not supplied).
The analyser is supplied with a flue gas
probe, protective rubber sleeve, battery
charger, operator's manual and carry case.
High suction double headed pump
Teflon lined flue probe
IR printer link - printed header can be customised
Memory to store 150 test results
Long life battery recharged in situ
Low range NO sensor in place of standard NO sensor
NO2 sensor in place of any other toxic gas sensor
Infra red impact printer
Carbon Monoxide (CO) to 10,000ppm with hydrogen
compensated sensor (alternatively CO to 100,000ppm
with high range sensor)
Nitric Oxide (NO) to 5000ppm with calculated NOx
(alternatively NO to 100ppm with better low range
accuracy)
Sulphur Dioxide (SO2) to 5000ppm
Alternatively any toxic sensor can be replaced with a
1000ppm Nitrogen Dioxide (NO2) sensor)
Inlet Temperature
Flue Gas Temperature
Differential pressure
Data Sheet
Please click here to find out more.
Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.