HomeLightning & Surges Protection › Air-termination Rods


Air-termination Rods


Self-supporting Air-termination Rods 2500 to 3500 mm

Self-supporting air-termination rods with tripod to protect roof-mounted structures, adjustable to the roof inclination up to max. 10°.

The air-termination rods are dimensioned for wind velocities up to 145 km/ and 162 km/h (wind load zone II + III).

The concrete base (Part No. 102 075 or 102 010) and the support plate (Part No. 102 060 or 102 050) have to be ordered separately.

Part numbers:

  105 425
  105 430
  105 435

Self-supporting Air-termination Rods 4000 to 8500 mm

Self-supporting air-termination rods with hinged tripod to protect larger roof-mounted structures, adjustable to the roof inclination up to max. 10° The air-termination rods are dimensioned for wind velocities up to 145 km/h (wind load zone II).

The stackable concrete base (Part No. 102 010) and the support plate (Part No. 102 050) have to be ordered separately.

Components:

- Pipe Ø40 x 5 mm
- Tubular air-termination rod tapered Ø16/10 mm; optionally Ø22/16/10 mm
- Double cleat for 2x Rd 8-10 mm
- Tripod for wedge mounting concrete bases

Part numbers:

Height up to 5500 mm

  105 400
  105 450
  105 500
  105 550

Height up to 8500 mm with adjustable StSt braces Ø10 mm

  105 600
  105 650
  105 700
  105 750
  105 800
  105 850


Datasheet


Self-supporting Air-termination Rods 12/14 m

Self-supporting air-termination rods with hinged tripod, to protect larger roof-mounted structures or to be erected on a compacted ground without foundation works, adjustable to the roof inclination up to max. 5° The air-termination rods are dimensioned for wind velocities up to 145 km/h (wind load zone II).

The stackable concrete base (Part No. 102 010) and the support plate (Part No. 102 050) have to be ordered separately.

The tapered pipes will be telescoped and then screwed together.

The transport length is approx. 4500 mm.

Components:

Aluminium pipe, tapered:

- Pipe Ø100x5 mm, length approx. 4000 mm
- Pipe Ø90x3 mm, length approx. 2000 mm
- Pipe Ø80x3 mm + Ø70x3 mm, length approx. 2000 mm each
- Optionally pipe Ø40x5 mm, length approx. 2000 mm
- Air-termination rod Al
- Double cleat for 2x Rd 8-10 mm
- Tripod for wedge mounting concrete bases including StSt braces 20x20x2 mm

Part numbers:

  105 912
  105 914

Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.

Back To Last Page

Dehn

Surge Arresters & Isolating Spark Gaps

DEHNcord Type 2 Surge Arresters
DEHNguard Modular Single-Pole Surge Arrester for D.C. Applications
DEHNpatch Arrester for Data Networks and Ethernet Applications
DEHNshield Multipole Combined Lightning Current And Surge Arresters
DEHNventil Multipole Modular Combined Lightning Current And Surge Arresters
DSP Mains Connection Boxes
DSP SH Mains Connection Boxes
EXFS 100 / EXFS 100 KU Isolating Spark Gaps
EXFS L / EXFS 100 Isolating Spark Gaps
TFS / KFSU Isolating Spark Gaps

Safety Equipment

PHE III Voltage Detectors
PHE Voltage Detector
ASP Non-Contact Voltage Detector
HSA 205 High-Voltage Indicator
PHG II Voltage Detector
PHE/G d.c. Voltage Detector
PHV Two-pole Phase Comparator
PHV I Single-pole Phase Comparator
DEHNcap Voltage Detecting Systems
IS STK Insulating Stick Kit with Silicon Rubber Insulator
IS STK Insulating Stick Kit
IS Insulating Sticks with Silicon Rubber Insulator
IS Insulating Sticks
SCS Switching Sticks with Silicon Rubber Insulator
Equipment for Voltages up to 1000 V
Single-pole Earthing and Discharge Devices

Earthing

Air-termination Rods
Pipe Clamps For Hazardous Areas

Live Working

Cleaning Equipment
Protective and Auxiliary Equipment

Safety Equipment for Electric Railway

Voltage Detectors
Insulating Stick Kit
SDS Voltage Limiting Device

Want A Quotation?

Please fill out the following fields and we will e-mail you a quotation shortly.